The Lower Limb Muscle Co-Activation Map during Human Locomotion: From Slow Walking to Running.

The central nervous system (CNS) controls movements and regulates joint stiffness with muscle co-activation, but until now, few studies have examined muscle pairs during running. This study aims to investigate differences in lower limb muscle coactivation during gait at different speeds, from walking to running. Nineteen healthy runners walked and ran at speeds ranging from 0.8 km/h to 9.3 km/h. Twelve lower limb muscles' co-activation was calculated using the time-varying multi-muscle co-activation function (TMCf) with global, flexor-extension, and rostro-caudal approaches. Spatiotemporal and kinematic parameters were also measured. We found that TMCf, spatiotemporal, and kinematic parameters were significantly affected by gait speed for all approaches. Significant differences were observed in the main parameters of each co-activation approach and in the spatiotemporal and kinematic parameters at the transition between walking and running. In particular, significant differences were observed in the global co-activation (CIglob, main effect F(1,17) = 641.04, p < 0.001; at the transition p < 0.001), the stride length (main effect F(1,17) = 253.03, p < 0.001; at the transition p < 0.001), the stride frequency (main effect F(1,17) = 714.22, p < 0.001; at the transition p < 0.001) and the Center of Mass displacement in the vertical (CoMy, main effect F(1,17) = 426.2, p < 0.001; at the transition p < 0.001) and medial-lateral (CoMz, main effect F(1,17) = 120.29 p < 0.001; at the transition p < 0.001) directions. Regarding the correlation analysis, the CoMy was positively correlated with a higher CIglob (r = 0.88, p < 0.001) and negatively correlated with Full Width at Half Maximum (FWHMglob, r = -0.83, p < 0.001), whereas the CoMz was positively correlated with the global Center of Activity (CoAglob, r = 0.97, p < 0.001). Positive and negative strong correlations were found between global co-activation parameters and center of mass displacements, as well as some spatiotemporal parameters, regardless of gait speed. Our findings suggest that walking and running have different co-activation patterns and kinematic characteristics, with the whole-limb stiffness exerted more synchronously and stably during running. The co-activation indexes and kinematic parameters could be the result of global co-activation, which is a sensory-control integration process used by the CNS to deal with more demanding and potentially unstable tasks like running.

Adaptive Lifting Index (aLI) for Real-Time Instrumental Biomechanical Risk Assessment: Concepts, Mathematics, and First Experimental Results.

When performing lifting tasks at work, the Lifting Index (LI) is widely used to prevent work-related low-back disorders, but it presents criticalities pertaining to measurement accuracy and precision. Wearable sensor networks, such as sensorized insoles and inertial measurement units, could improve biomechanical risk assessment by enabling the computation of an adaptive LI (aLI) that changes over time in relation to the actual method of carrying out lifting. This study aims to illustrate the concepts and mathematics underlying aLI computation and compare aLI calculations in real-time using wearable sensors and force platforms with the LI estimated with the standard method used by ergonomists and occupational health and safety technicians. To reach this aim, 10 participants performed six lifting tasks under two risk conditions. The results show us that the aLI value rapidly converges towards the reference value in all tasks, suggesting a promising use of adaptive algorithms and instrumental tools for biomechanical risk assessment.

High-density surface electromyography allows to identify risk conditions and people with and without low back pain during fatiguing frequency-dependent lifting activities.

Low back pain (LBP) is a leading cause of disability in the workplace, often caused by manually lifting of heavy loads. Instrumental-based assessment tools are used to quantitatively assess the biomechanical risk of lifting activities. This study aims to verify that, during the execution of fatiguing frequency-dependent lifting, high-density surface electromyography (HDsEMG) allows the discrimination of healthy controls (HC) versus people with LBP and biomechanical risk levels. Fifteen HC and eight people with LBP performed three lifting tasks with a progressively increasing lifting index, each lasting 15 min. Erector spinae (ES) activity was recorded using HDsEMG and amplitude parameters were calculated to characterize the spatial distribution of muscle activity. LBP group showed a less ES activity than HC (lower root mean square across the grid and of the activation region) and an involvement of the same muscular area across the task (lower coefficient of variation of the center of gravity of muscle activity). The results indicate the usefulness of HDsEMG parameters to classify risk levels for both HC and LBP groups and to determine differences between them. The findings suggest that the use of HDsEMG could expand the capabilities of existing instrumental-based tools for biomechanical risk classification during lifting activities.

Does a Soft Actuated Back Exosuit Influence Multimodal Physiological Measurements and User Perception During an Industry Inspired Task?

Back support soft exosuits are promising solutions to reduce risk of musculoskeletal injuries at workplaces resulting from physically demanding and repetitive lifting tasks. Design of novel active exosuits address the impact on the muscle activity and metabolic costs but do not consider other critical aspects such as comfort and user perception during the intended tasks. Thus, in this study, we describe a novel soft active exosuit in line with its impact on physiological and subjective measures during lifting. We tested four healthy participants who performed repetitive lifting tasks with and without this exosuit. The exosuit provided assistance proportional to the lumbar flexion angle measured using an inertial measurement unit. We measured the participant's multimodal physiological measures including surface electromyography, metabolic cost, heart rate, and skin temperature. We also measured subjective scores on user exertion, task load, and device acceptability. All participants perceived a reduction in task load when using the exosuit. Three participants showed reduction of muscle activity for the erector spinae muscles. The metabolic costs and heart rate reserve reduced for two participants, with similar trends for skin temperature. For future development of workplace exosuits, we recommend incorporating assessments of both physiological and subjective measures, considering the user-dependent response to the exosuit.

Interdisciplinary evaluation of a robot physically collaborating with workers.

Collaborative Robots-CoBots-are emerging as a promising technological aid for workers. To date, most CoBots merely share their workspace or collaborate without contact, with their human partners. We claim that robots would be much more beneficial if they physically collaborated with the worker, on high payload tasks. To move high payloads, while remaining safe, the robot should use two or more lightweight arms. In this work, we address the following question: to what extent can robots help workers in physical human-robot collaboration tasks? To find an answer, we have gathered an interdisciplinary group, spanning from an industrial end user to cognitive ergonomists, and including biomechanicians and roboticists. We drew inspiration from an industrial process realized repetitively by workers of the SME HANKAMP (Netherlands). Eleven participants replicated the process, without and with the help of a robot. During the task, we monitored the participants' biomechanical activity. After the task, the participants completed a survey with usability and acceptability measures; seven workers of the SME completed the same survey. The results of our research are the following. First, by applying-for the first time in collaborative robotics-Potvin's method, we show that the robot substantially reduces the participants' muscular effort. Second: we design and present an unprecedented method for measuring the robot reliability and reproducibility in collaborative scenarios. Third: by correlating the worker's effort with the power measured by the robot, we show that the two agents act in energetic synergy. Fourth: the participant's increasing level of experience with robots shifts his/her focus from the robot's overall functionality towards finer expectations. Last but not least: workers and participants are willing to work with the robot and think it is useful.

The assistance of BAZAR robot promotes improved upper limb motor coordination in workers performing an actual use-case manual material handling.

This study aims at evaluating upper limb muscle coordination and activation in workers performing an actual use-case manual material handling (MMH). The study relies on the comparison of the workers' muscular activity while they perform the task, with and without the help of a dual-arm cobot (BAZAR). Eleven participants performed the task and the flexors and extensors muscles of the shoulder, elbow, wrist, and trunk joints were recorded using bipolar electromyography. The results showed that, when the particular MMH was carried out with BAZAR, both upper limb and trunk muscular co-activation and activation were decreased. Therefore, technologies that enable human-robot collaboration (HRC), which share a workspace with employees, relieve employees of external loads and enhance the effectiveness and calibre of task completion. Additionally, these technologies improve the worker's coordination, lessen the physical effort required to interact with the robot, and have a favourable impact on his or her physiological motor strategy. Practitioner summary: Upper limb and trunk muscle co-activation and activation is reduced when a specific manual material handling was performed with a cobot than without it. By improving coordination, reducing physical effort, and changing motor strategy, cobots could be proposed as an ergonomic intervention to lower workers' biomechanical risk in industry.

Identification of Gait Unbalance and Fallers Among Subjects with Cerebellar Ataxia by a Set of Trunk Acceleration-Derived Indices of Gait.

This study aimed to assess the ability of 25 gait indices to characterize gait instability and recurrent fallers among persons with primary degenerative cerebellar ataxia (pwCA), regardless of gait speed, and investigate their correlation with clinical and kinematic variables. Trunk acceleration patterns were acquired during the gait of 34 pwCA, and 34 age- and speed-matched healthy subjects (HSmatched) using an inertial measurement unit. We calculated harmonic ratios (HR), percent recurrence, percent determinism, step length coefficient of variation, short-time largest Lyapunov exponent (sLLE), normalized jerk score, log-dimensionless jerk (LDLJ-A), root mean square (RMS), and root mean square ratio of accelerations (RMSR) in each spatial direction for each participant. Unpaired t-tests or Mann-Whitney tests were performed to identify significant differences between the pwCA and HSmatched groups. Receiver operating characteristics were plotted to assess the ability to characterize gait alterations in pwCA and fallers. Optimal cutoff points were identified, and post-test probabilities were calculated. The HRs showed to characterize gait instability and pwCA fallers with high probabilities. They were correlated with disease severity and stance, swing, and double support duration, regardless of gait speed. sLLEs, RMSs, RMSRs, and LDLJ-A were slightly able to characterize the gait of pwCA but failed to characterize fallers.

Characterizing the Gait of People With Different Types of Amputation and Prosthetic Components Through Multimodal Measurements: A Methodological Perspective.

Prosthetic gait implies the use of compensatory motor strategies, including alterations in gait biomechanics and adaptations in the neural control mechanisms adopted by the central nervous system. Despite the constant technological advancements in prostheses design that led to a reduction in compensatory movements and an increased acceptance by the users, a deep comprehension of the numerous factors that influence prosthetic gait is still needed. The quantitative prosthetic gait analysis is an essential step in the development of new and ergonomic devices and to optimize the rehabilitation therapies. Nevertheless, the assessment of prosthetic gait is still carried out by a heterogeneous variety of methodologies, and this limits the comparison of results from different studies, complicating the definition of shared and well-accepted guidelines among clinicians, therapists, physicians, and engineers. This perspective article starts from the results of a project funded by the Italian Worker's Compensation Authority (INAIL) that led to the generation of an extended dataset of measurements involving kinematic, kinetic, and electrophysiological recordings in subjects with different types of amputation and prosthetic components. By encompassing different studies published along the project activities, we discuss the specific information that can be extracted by different kinds of measurements, and we here provide a methodological perspective related to multimodal prosthetic gait assessment, highlighting how, for designing improved prostheses and more effective therapies for patients, it is of critical importance to analyze movement neural control and its mechanical actuation as a whole, without limiting the focus to one specific aspect.

Indexes for motor performance assessment in job integration/reintegration of people with neuromuscular disorders: A systematic review.

Individuals of working age affected by neuromuscular disorders frequently experience issues with their capacity to get employment, difficulty at work, and premature work interruption. Anyway, individuals with a disability could be able to return to work, thanks to targeted rehabilitation as well as ergonomic and training interventions. Biomechanical and physiological indexes are important for evaluating motor and muscle performance and determining the success of job integration initiatives. Therefore, it is necessary to determinate which indexes from the literature are the most appropriate to evaluate the effectiveness and efficiency of the return-to-work programs. To identify current and future valuable indexes, this study uses a systematic literature review methodology for selecting articles published from 2011 to March 30, 2021 from Scopus, Web of Science, and PubMed and for checking the eligibility and the potential bias risks. The most used indexes for motor performance assessment were identified, categorized, and analyzed. This review revealed a great potential for kinetic, kinematic, surface electromyography, postural, and other biomechanical and physiological indexes to be used for job integration/reintegration. Indeed, wearable miniaturized sensors, kinematic, kinetic, and sEMG-based indexes can be used to control collaborative robots, classify residual motor functions, and assess pre-post-rehabilitation and ergonomic therapies.

Centre of pressure parameters for the assessment of biomechanical risk in fatiguing frequency-dependent lifting activities.

Lifting tasks, among manual material handling activities, are those mainly associated with low back pain. In recent years, several instrumental-based tools were developed to quantitatively assess the biomechanical risk during lifting activities. In this study, parameters related to balance and extracted from the Centre of Pressure (CoP) data series are studied in fatiguing frequency-dependent lifting activities to: i) explore the possibility of classifying people with LBP and asymptomatic people during the execution of task; ii) examine the assessment of the risk levels associated with repetitive lifting activities, iii) enhance current understanding of postural control strategies during lifting tasks. Data were recorded from 14 asymptomatic participants and 7 participants with low back pain. The participants performed lifting tasks in three different lifting conditions (with increasing lifting frequency and risk levels) and kinetic and surface electromyography (sEMG) data were acquired. Kinetic data were used to calculated the CoP and parameters extracted from the latter show a discriminant capacity for the groups and the risk levels. Furthermore, sEMG parameters show a trend compatible with myoelectric manifestations of muscular fatigue. Correlation results between sEMG and CoP velocity parameters revealed a positive correlation between amplitude sEMG parameters and CoP velocity in both groups and a negative correlation between frequency sEMG parameters and CoP velocity. The current findings suggest that it is possible to quantitatively assess the risk level when monitoring fatiguing lifting tasks by using CoP parameters as well as identify different motor strategies between people with and without LBP.

Machine Learning Approach to Support the Detection of Parkinson's Disease in IMU-Based Gait Analysis.

The aim of this study was to determine which supervised machine learning (ML) algorithm can most accurately classify people with Parkinson's disease (pwPD) from speed-matched healthy subjects (HS) based on a selected minimum set of IMU-derived gait features. Twenty-two gait features were extrapolated from the trunk acceleration patterns of 81 pwPD and 80 HS, including spatiotemporal, pelvic kinematics, and acceleration-derived gait stability indexes. After a three-level feature selection procedure, seven gait features were considered for implementing five ML algorithms: support vector machine (SVM), artificial neural network, decision trees (DT), random forest (RF), and K-nearest neighbors. Accuracy, precision, recall, and F1 score were calculated. SVM, DT, and RF showed the best classification performances, with prediction accuracy higher than 80% on the test set. The conceptual model of approaching ML that we proposed could reduce the risk of overrepresenting multicollinear gait features in the model, reducing the risk of overfitting in the test performances while fostering the explainability of the results.

Trunk Muscle Coactivation in People with and without Low Back Pain during Fatiguing Frequency-Dependent Lifting Activities.

Lifting tasks are manual material-handling activities and are commonly associated with work-related low back disorders. Instrument-based assessment tools are used to quantitatively assess the biomechanical risk associated with lifting activities. This study aims at highlighting different motor strategies in people with and without low back pain (LBP) during fatiguing frequency-dependent lifting tasks by using parameters of muscle coactivation. A total of 15 healthy controls (HC) and eight people with LBP performed three lifting tasks with a progressively increasing lifting index (LI), each lasting 15 min. Bilaterally erector spinae longissimus (ESL) activity and rectus abdominis superior (RAS) were recorded using bipolar surface electromyography systems (sEMG), and the time-varying multi-muscle coactivation function (TMCf) was computed. The TMCf can significantly discriminate each pair of LI and it is higher in LBP than HC. Collectively, our findings suggest that it is possible to identify different motor strategies between people with and without LBP. The main finding shows that LBP, to counteract pain, coactivates the trunk muscles more than HC, thereby adopting a strategy that is stiffer and more fatiguing.

Ability of a Set of Trunk Inertial Indexes of Gait to Identify Gait Instability and Recurrent Fallers in Parkinson's Disease.

The aims of this study were to assess the ability of 16 gait indices to identify gait instability and recurrent fallers in persons with Parkinson's disease (pwPD), regardless of age and gait speed, and to investigate their correlation with clinical and kinematic variables. The trunk acceleration patterns were acquired during the gait of 55 pwPD and 55 age-and-speed matched healthy subjects using an inertial measurement unit. We calculated the harmonic ratios (HR), percent recurrence, and percent determinism (RQAdet), coefficient of variation, normalized jerk score, and the largest Lyapunov exponent for each participant. A value of ≤1.50 for the HR in the antero-posterior direction discriminated between pwPD at Hoehn and Yahr (HY) stage 3 and healthy subjects with a 67% probability, between pwPD at HY 3 and pwPD at lower HY stages with a 73% probability, and it characterized recurrent fallers with a 77% probability. Additionally, HR in the antero-posterior direction was correlated with pelvic obliquity and rotation. RQAdet in the antero-posterior direction discriminated between pwPD and healthy subjects with 67% probability, regardless of the HY stage, and was correlated with stride duration and cadence. Therefore, HR and RQAdet in the antero-posterior direction can both be used as age- and-speed-independent markers of gait instability.

Bipolar versus high-density surface electromyography for evaluating risk in fatiguing frequency-dependent lifting activities.

Workers often develop low back pain due to manually lifting heavy loads. Instrumental-based assessment tools are used to quantitatively assess the biomechanical risk in lifting activities. This study aims to verify the hypothesis that high-density surface electromyography (HDsEMG) allows an optimized discrimination of risk levels associated with different fatiguing lifting conditions compared to traditional bipolar sEMG. 15 participants performed three lifting tasks with a progressively increasing lifting index (LI) each lasting 15 min. Erector spinae (ES) activity was recorded using both bipolar and HDsEMG systems. The amplitude of both bipolar and HDsEMG can significantly discriminate each pair of LI. HDsEMG data could discriminate across the different LIs starting from the fourth minute of the task while bipolar sEMG could only do so towards the end. The higher discriminative power of HDsEMG data across the lifting tasks makes such methodology a valuable tool to be used to monitor fatigue while lifting and could extend the possibilities offered by currently available instrumental-based tools.

An artificial neural network approach to detect presence and severity of Parkinson's disease via gait parameters.

INTRODUCTION: Gait deficits are debilitating in people with Parkinson's disease (PwPD), which inevitably deteriorate over time. Gait analysis is a valuable method to assess disease-specific gait patterns and their relationship with the clinical features and progression of the disease. OBJECTIVES: Our study aimed to i) develop an automated diagnostic algorithm based on machine-learning techniques (artificial neural networks [ANNs]) to classify the gait deficits of PwPD according to disease progression in the Hoehn and Yahr (H-Y) staging system, and ii) identify a minimum set of gait classifiers. METHODS: We evaluated 76 PwPD (H-Y stage 1-4) and 67 healthy controls (HCs) by computerized gait analysis. We computed the time-distance parameters and the ranges of angular motion (RoMs) of the hip, knee, ankle, trunk, and pelvis. Principal component analysis was used to define a subset of features including all gait variables. An ANN approach was used to identify gait deficits according to the H-Y stage. RESULTS: We identified a combination of a small number of features that distinguished PwPDs from HCs (one combination of two features: knee and trunk rotation RoMs) and identified the gait patterns between different H-Y stages (two combinations of four features: walking speed and hip, knee, and ankle RoMs; walking speed and hip, knee, and trunk rotation RoMs). CONCLUSION: The ANN approach enabled automated diagnosis of gait deficits in several symptomatic stages of Parkinson's disease. These results will inspire future studies to test the utility of gait classifiers for the evaluation of treatments that could modify disease progression.

The Sensor-Based Biomechanical Risk Assessment at the Base of the Need for Revising of Standards for Human Ergonomics.

Due to the epochal changes introduced by "Industry 4.0", it is getting harder to apply the varying approaches for biomechanical risk assessment of manual handling tasks used to prevent work-related musculoskeletal disorders (WMDs) considered within the International Standards for ergonomics. In fact, the innovative human-robot collaboration (HRC) systems are widening the number of work motor tasks that cannot be assessed. On the other hand, new sensor-based tools for biomechanical risk assessment could be used for both quantitative "direct instrumental evaluations" and "rating of standard methods", allowing certain improvements over traditional methods. In this light, this Letter aims at detecting the need for revising the standards for human ergonomics and biomechanical risk assessment by analyzing the WMDs prevalence and incidence; additionally, the strengths and weaknesses of traditional methods listed within the International Standards for manual handling activities and the next challenges needed for their revision are considered. As a representative example, the discussion is referred to the lifting of heavy loads where the revision should include the use of sensor-based tools for biomechanical risk assessment during lifting performed with the use of exoskeletons, by more than one person (team lifting) and when the traditional methods cannot be applied. The wearability of sensing and feedback sensors in addition to human augmentation technologies allows for increasing workers' awareness about possible risks and enhance the effectiveness and safety during the execution of in many manual handling activities.

Pelvic obliquity as a compensatory mechanism leading to lower energy recovery: Characterization among the types of prostheses in subjects with transfemoral amputation.

BACKGROUND: Subjects with transfemoral amputation (TFA) show an asymmetric gait pattern associated with a decreased ability to recover mechanical energy and an increased metabolic cost of walking. RESEARCH QUESTION: This study aimed to identify the spatio-temporal and kinematic gait variables correlated with mechanical energy values in subjects with TFA and to observe the ability of the identified parameters to discriminate between TFA and controls according to the type of prosthesis. METHODS: The gait of 40 subjects with TFA was evaluated with a motion 3-D optoelectronic system. Nine subjects wore a mechanical prosthesis (TFAm), seventeen a C-Leg prosthesis (TFAc), and fourteen a Genium prosthesis (TFAg). Spatio-temporal and pelvic kinematic parameters were measured. Energy recovery was measured relative to the whole-body center of mass (CoM) kinematics as the fraction of mechanical energy recovered during each walking step (R-step). Correlation tests and multiple linear regression analyses were used to evaluate the correlation and association between kinematic and energy variables, respectively. Receiver operating characteristics curves were plotted to assess the ability of the correlated parameter to distinguish subjects with TFA from controls, and optimal cutoff point values were calculated according to the type of prosthesis. RESULTS: Among the spatio-temporal and kinematic parameters correlated to R-step, only pelvic obliquity of the prosthetic side was significantly associated with R-step. It showed an excellent ability to discriminate between TFA and controls. Furthermore, pelvic obliquity showed an excellent discriminative ability in identifying TFAm and TFAc and a good discriminative ability in identifying TFAg from controls. SIGNIFICANCE: Pelvic obliquity plays an important role in energy recovery during gait for subjects using prosthetics. This information might be exploited to monitor the adaptation of subjects with TFA to prosthetic devices, to lower the energetic cost of walking potentially, and to reduce the long-term risks of secondary physical complications in prosthetic users.

Global Muscle Coactivation of the Sound Limb in Gait of People with Transfemoral and Transtibial Amputation.

The aim of this study was to analyze the effect of the level of amputation and various prosthetic devices on the muscle activation of the sound limb in people with unilateral transfemoral and transtibial amputation. We calculated the global coactivation of 12 muscles using the time-varying multimuscle coactivation function method in 37 subjects with unilateral transfemoral amputation (10, 16, and 11 with mechanical, electronic, and bionic prostheses, respectively), 11 subjects with transtibial amputation, and 22 healthy subjects representing the control group. The results highlighted that people with amputation had a global coactivation temporal profile similar to that of healthy subjects. However, amputation increased the level of the simultaneous activation of many muscles during the loading response and push-off phases of the gait cycle and decreased it in the midstance and swing subphases. This increased coactivation probably plays a role in prosthetic gait asymmetry and energy consumption. Furthermore, people with amputation and wearing electronic prosthesis showed lower global coactivation when compared with people wearing mechanical and bionic prostheses. These findings suggest that the global lower limb coactivation behavior can be a useful tool to analyze the motor control strategies adopted and the ability to adapt to the prosthetic device.

Impairment of Global Lower Limb Muscle Coactivation During Walking in Cerebellar Ataxias.

The aim of this study was to investigate the time-varying multi-muscle coactivation function (TMCf) in the lower limbs during gait and its relationship with the biomechanical and clinical features of patients with cerebellar ataxia. A total of 23 patients with degenerative cerebellar ataxia (16 with spinocerebellar ataxia, 7 with adult-onset ataxia of unknown etiology) and 23 age-, sex-, and speed-matched controls were investigated. The disease severity was assessed using the Scale for the Assessment and Rating of Ataxia (SARA) in all patients. During walking, simultaneous acquisition of kinematic, kinetic, and electromyography data was performed using a motion analysis system. The coactivation was processed throughout the gait cycle using the TMCf, and the following parameters were measured: synthetic coactivation index, full width at half maximum, and center of activity. Spatiotemporal (walking speed, stance duration, swing duration, first and second double-support durations, step length, step width, stride length, Center of Mass displacement), kinetic (vertical component of GRFs), and energy consumption (total energy consumption and mechanical energy recovered) parameters were also measured. The coactivation variables were compared between patients and controls and were correlated with both clinical and gait variables. A significantly increased global TMCf was found in patients compared with controls. In addition, the patients showed a significant shift of the center of activity toward the initial contact and a significant reduction in energy recovery. All coactivation parameters were negatively correlated with gait speed, whereas the coactivation index and center of activity were positively correlated with both center-of-mass mediolateral displacement values and SARA scores. Our findings suggest that patients use global coactivation as a compensatory mechanism during the earliest and most challenging subphase (loading response) of the gait cycle to reduce the lateral body sway, thus improving gait stability at the expense of effective energy recovery. This information could be helpful in optimizing rehabilitative treatment aimed at improving lower limb muscle control during gait in patients with cerebella ataxia.

Common and specific gait patterns in people with varying anatomical levels of lower limb amputation and different prosthetic components.

The present study's aim was to identify the kinematic and kinetic gait patterns and to measure the energy consumption in people with amputation according to both the anatomical level of amputation and the type of prosthetic components in comparison with a control group matched for the gait speed. Fifteen subjects with unilateral transtibial amputation (TTA), forty with unilateral transfemoral amputation (TFA) (9 with mechanical, 17 with CLeg and 14 with Genium prosthesis) and forty healthy subjects were recruited. We computed the time-distance gait parameters; the range of angular motion (RoM) at hip, knee and ankle joints, and at the trunk and pelvis; the values of the 2 peaks of vertical force curve; the full width at half maximum (FWHM) and center of activity (CoA) of vertical force; the mechanical behavior in terms of energy recovery (R-step) and energy consumption. The main results were: i) both TTA and TFA show a common gait pattern characterized by a symmetric increase of step length, step width, double support duration, pelvic obliquity, trunk lateral bending and trunk rotation RoMs compared to control groups. They show also an asymmetric increase of stance duration and of Peak1 in non-amputated side and a decrease of ankle RoM in amputated side; ii) only TFA show a specific gait pattern, depending on the level of amputation, characterized by a symmetric reduction of R-step and an asymmetric decrease of stance duration, CoA and FWHM and an increase of Peak1 in the amputated side and of hip and knee RoM, CoA and FWHM in the non-amputated side; iii) people with amputation with Genium prosthesis show a longer step length and increased hip and knee RoMs compared to people with amputation with mechanical prosthesis who conversely show an increased pelvic obliquity: these are specific gait patterns depending of the type of prosthesis. In conclusion, we identified both common and specific gait patterns in people with amputation, either regardless of, or according to their level of amputation and the type of prosthetic component.